Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Shingle Repair: The Pasadena Owner’s Guide
Boral shingle repair in Pasadena typically runs $350 – $900 installed, depending on how many tiles are damaged and whether the underlayment beneath them needs attention. We keep common Boral tile profiles and compatible ridge caps stocked in our Pasadena yard, so most repairs happen within a few days of your estimate, not weeks. You’ll usually spot the problem first as cracked or slipped tiles after a Santa Ana wind event, or as a small ceiling stain that shows up a month or two after the winter rains start.
If you have a Boral roof, you already know it isn’t the cheapest system out there. Boral’s concrete and steel tile lines are popular in Pasadena neighborhoods like Madison Heights, San Rafael, and Linda Vista because they hold up against our heat and long dry spells. But “holds up” doesn’t mean “never needs a visit.” Tiles crack, fasteners fail, and flashing pulls away over time. When that happens, the repair has to match the roof, not just cover it.
Which Boral Models This Applies To
We work on the full range of Boral tile that shows up on Pasadena roofs. That means Boral’s flat and low-profile concrete tile (common on mid-century ranch styles in Hastings Ranch), the heavier high-profile S-tile and mission-style profiles you see on Spanish revival homes in Caltech-adjacent neighborhoods, and Boral’s steel shingle systems, which are less common but show up on some newer builds in the hills.
Boral’s tile lines are broadly divided by profile and weight. The key thing we check before any repair is the tile’s underside markings, which usually identify the plant and profile code. That matters, because a “Boral” tile from two different manufacturing runs can be off by a few millimeters in width or thickness. A mismatch of even a quarter inch throws off the interlocking pattern, creates lippage, and makes the repair obvious from the curb. We’ll always take one intact tile off your roof, match it against our stock and Boral’s current production specs, and show you the match before we install it.
For Boral steel shingles, the compatibility questions are different: panel gauge, coating system, and profile lock-out. Boral’s folded-lock steel profiles don’t accept generic aftermarket panels cleanly, so for steel we use Boral OEM or a manufacturer-approved equivalent. For concrete tile, quality aftermarket is sometimes the better choice for discontinued colors. We’ll tell you honestly which route makes sense for your roof.
Styles & brands we work with
Signs Your Boral Shingle Repair Is Failing
- Water staining at the ceiling or wall, usually near eaves or valleys. This is the symptom that finally gets a call. By the time water shows up inside, the tile or underlayment above has usually been compromised for months. We trace the leak from the stain upward, because water travels sideways along the deck before it drops.
- Visible cracked, chipped, or shifted tiles you can see from the ground or a ladder. Concrete tile cracks in Pasadena usually come from impact (foot traffic, tree limbs) or thermal stress. A single cracked tile is often a two-hundred-dollar fix if caught early. Left alone, it becomes a deck rot problem that multiplies the cost.
- Granules or tile fragments collecting in gutters or at downspouts. Some sediment is normal over decades. Sudden or concentrated accumulation around one roof plane suggests tile-to-tile wear or a failing tile edge. We’ll get on a ladder and check before it turns structural.
- Rust-colored streaks or nail pops on tile surfaces. Older Boral installations in Pasadena sometimes used fasteners that weren’t fully stainless. When those fasteners corrode, they stain the tile and eventually let it loosen. We replace the hardware, not just the tile.
- A mushy or soft feel underfoot in one area. If you ever walk your roof (which we don’t recommend without proper shoes and a tie-off), a soft spot means the decking below the tile has absorbed water. That’s no longer a shingle repair. That’s deck replacement, and we’ll show you the moisture readings before we touch anything.
Replacement Cost & What’s Included
For most Boral shingle repairs in Pasadena, you’re looking at these numbers from us:
- Single cracked or broken tile replacement: $350 – $500 installed
- Small tile group repair (3 – 8 tiles, including underlayment patch): $550 – $900 installed
- Ridge or hip cap reset with new mortar or adhesive: $400 – $700 installed
- Steel shingle panel replacement (single panel, Boral OEM): $500 – $800 installed
Every one of those numbers includes the tile or panel, the fasteners, the labor, the disposal, and a written invoice. If we open the roof and find additional damage, we stop, take photos, and bring you a written change order before any extra work starts. The price doesn’t move unless you approve it in writing. And every repair carries our 365-Day Done Right Promise: if that fix fails within a year, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
I’ll give you the straight answer: for most Boral tile repairs, I’d rather you call us. Concrete tile is deceptively heavy, and walking a wet tile roof in Pasadena’s winter is genuinely dangerous. We’ve also undone plenty of weekend repairs where a homeowner used the wrong tile, bedded it in store-bought caulk instead of proper adhesive, and created a worse leak than they started with. What’s safe for you to do: clear gutters, look for visible cracks from the ground, and take photos to send us for a first-pass read. What’s not safe: pulling tiles, walking a two-story tile slope, or sealing anything with a product from the paint aisle.
If you’re in Pasadena and you’re not sure whether that crack is a real leak source or just cosmetic, send us a photo. We’ll give you an honest take before you spend a dollar. Or call (626) 389-1956 and we’ll schedule a free on-site estimate. Get it in writing – then get it done right.
FAQs
A properly installed Boral concrete tile roof in Pasadena can last 40 to 50 years, and the tile itself often outlives the underlayment underneath it. In our dry, sunny climate, the tile rarely “wears out” – what fails first is the underlayment, the fasteners, or the flashing. Expect to replace underlayment and fasteners at roughly the 25-to-30-year mark even if the tiles still look fine, especially on west-facing roof planes that take the full brunt of afternoon sun and Santa Ana winds.
No, not in a way that lasts. Tile is a rigid, fired product – once it cracks, the structural integrity is gone and any adhesive patch is a temporary bandage that will fail in the next hot-cold cycle. A single tile replacement is a fraction of the cost of repairing the water damage that a failed patch eventually causes. Call (626) 389-1956 and we’ll match the tile and swap it for a fair price.
Most single-tile or small-group repairs are done in one visit, typically 2 to 4 hours once we’re on site. That includes setup, the repair itself, and photo documentation of before and after. If we find deck rot or underlayment damage, the job extends and we’ll bring you a written change order before any additional work begins. Either way, you’ll know the schedule before we start – not after.
We keep common Boral concrete tile profiles and ridge caps in our Pasadena yard, along with compatible underlayment and stainless fasteners. If your tile is a discontinued profile or a less common steel panel, we order it directly from Boral or an approved supplier and typically have it in hand within a week. We’ll tell you at the estimate whether your tile is something we can grab off the truck or something that needs an order, so there are no surprises.
Call Crestview Roofing Co Pasadena for Boral Shingle Repair
If you own a Boral roof and you’ve spotted a crack, a slipped tile, or a watermark on your ceiling, don’t wait for the next rain to confirm the problem. Call (626) 389-1956 and talk to a live person – day or night, someone answers. We’ll schedule a free estimate, put the price in writing before any tile comes off, and show you photo proof when the work is done. That’s how we’ve done it since 2000, and it’s how we’ll do it on your Pasadena roof.
Written by Dylan Pace, Owner, Crestview Roofing Co Pasadena at Crestview Roofing Co Pasadena, serving Pasadena and nearby areas.